Only 1 available
WBT-2 Cutter
€150.00*
WBT-2 Cutter Set .The WBT-2 Cutter scores with its light weight,its flexibility as well as the great battery power.It is best suited for single layer cutting of classic textiles such as cotton,jersey,spandex,denim,leather and other light textiles.It can be effortlessly cut long webs but also radii.Technical data: Li-Ion battery 5000 mAh 445gr. Weight up to 6mm max. cutting height smooth cutting edgeScope of delivery: Motor WBT-2 2 cutting heads quick charger Tool for cutting head change Spare part set Adapter for direct current operation via 230V
Only 10 available
Stainless tailor scissors from KAI 2203/R/9,0"
€82.50*
Stainless tailor scissors from KAI 2203/R/9,0"This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws that allow easy tension adjustment.This model is characterized by the easy gait and easy cutting even of thicker materials.Technical data: Overall length: 25.0 cm - 9.0" Cutting length: 9,5 cm Weight: 200 g Stainless steel with approx. 58 HRC Slim blades
Spare blade for Azzurro 6-Edges-HSS with Titanium-Coating, 50mm
€25.00*
Our Titanium-Coated HSS blade with 6-Edges, for the Azzurro Cutter.Diameter: 50mm
ROBUSO Leather/Cardboard/Carpet Scissors 1080/D/8.5"
€72.25*
ROBUSO Leather/Cardboard/Carpet Scissors 1080/D/8.5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors.
Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.
Our ROBUSO Leather and Carpet Shears are the ideal shears for cutting thicker materials. Due to their longer blade and good leverage, the cutting force at the tip is very high.
It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture.
The scissors are ideal for cutting leather, cardboard, rubber, carpet and for cutting multiple layers of fabric on top of each other.
Technical data:
Overall length 22.5 cm - 8.5" inches (cutting length: 6.5 cm).
Weight 240 g
Material: C60 carbon steel with hardness of approx. 59-60 HRC
Nickel-plated scissors blades
Powder coated handles
One cutting edge micro-serrated
Only 1 available
ROBUSO Leather/Cardboard Scissors 1078/C/9.5"
€96.40*
ROBUSO Leather/Cardboard Scissors 1078/C/9.5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors.
Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.
Our ROBUSO Stencil Shears 1078/C/9.5" are highly regarded for their long handles and short, strong blades. Due to its good leverage and its double-sided micro serration, it is ideally suited for short powerful cuts in leather, felt and cardboard.
It also convinces with its powder-coated red handles with non-slip textured surface. This creates a skin-friendly and comfortable surface, high impact resistance and generates improved resistance to heat, sweat and moisture.
Technical data:
Overall length 25 cm - 9.5" inches (cutting length: 4.5 cm).
Weight 200 g
Material: C60 carbon steel with hardness of approx. 59-60 HRC
Powder coated handles
Short blades, long handles
Only 3 available
ROBUSO Leather scissors, nickel plated 1025/E/8"
€86.25*
ROBUSO Leather scissors, nickel plated 1025/E/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For a pleasant cutting experience, our scissors are light and smooth. This is one reason among many why our scissors are so appreciated by our customers.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.Our 1025/E/8" cutting shears with slim, tapered blades are a new development from ROBUSO. It is characterized by its higher placed screw and its large long eye, which offers space for three fingers. The special feature of these scissors is their hair scissor action, the very fine, smooth action resembles that of hair scissors.This is achieved by the long experience of our skilled workers and a special Japanese grinding technique. This makes these scissors very special in the field of tailor scissors.It was important to us with the cutting scissors from Solingen that they fit ergonomically well in the hand and have a strong cutting force up to the tip of the blades.The scissors are excellent for cutting light and medium weight fabrics, upholstery fabrics, leather, as well as tarpaulin, tent fabrics and thin cardboard.Specifications:Overall length 21 cm - 8" inches (cutting length: 8 cm).Weight 166 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCAll nickel platedErgonomic handlesHair scissors course
ROBUSO Leather scissors, double serrated 1076/C/7"
€52.30*
With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied.
It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.
We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.
Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.
Our ROBUSO Leather Shears 1076/C/7" are highly regarded for their long handles and short, narrow, tapered blades. Due to its good leverage and micro serrations on both sides, it is ideally suited as leather shears, for short, strong cuts in upholstery and for trimming automotive trim parts.
They also impress with their powder-coated red handles with non-slip textured surface. This produces a skin-friendly and pleasant surface, high impact resistance and generates improved resistance to heat, sweat and moisture.
Technical data:
- Overall length 18.5 cm - 7" inches (cutting length: 4.5 cm).
- Weight 87 g
- Material: C60 carbon steel with hardness of approx. 59-60 HRC
- Powder coated handles
- Micro serration on both sides
ROBUSO Leather scissors, curved up & serrated 1076/2/C/7"
€59.50*
ROBUSO Leather scissors, curved up & serrated 1076/2/C/7"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied.
It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.
We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.
Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.
Our ROBUSO Leather Curved Blade Scissors 1076/2/C/7" are highly regarded for their long handles and short, narrow, tapered blades. Due to its good leverage and its micro serration on both sides, it is ideally suited as leather shears in the upholstery and automotive industry, for trimming edges and protrusions.
It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture.
Technical data:
Overall length 18.5 cm - 7" inches (cutting length: 4.5 cm).
Weight 87 g
Material: C60 carbon steel with hardness of approx. 59-60 HRC
Powder coated handles
Micro serration on both sides
Curved blades
ROBUSO Edge shears, handles curved 1080/3/D/8,5"
€79.15*
ROBUSO Edge shears, handles curved 1080/3/D/8,5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors.Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.Our ROBUSO curved edge shears are the ideal shears for trimming edges. Due to its longer blade and good leverage, the cutting force at the tip is very high.It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture.The scissors are ideal for trimming edges and borders in upholstery, as well as carpet installation.Technical data:Overall length 22.5 cm - 8.5" inches (cutting length: 6.5 cm).Weight 240 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel-plated scissors bladesPowder coated handlesCurved handles
ROBUSO cutting shears, for heavy fabrics 1023/C/10"
€107.45*
ROBUSO cutting shears, for heavy fabrics 1023/C/10"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
For a pleasant cutting experience, our scissors are light and smooth. This is one reason among many why our scissors are so appreciated by our customers.
We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.
Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.
Our 1023/C/10" trimming shears are a so-called American WISS model with tapered, strong blades, a large handle for four fingers and strong hands. Our customers buy this heavy duty shear mainly because of its good leverage and brilliant red powder coated handles. This powder coating results in a skin-friendly and comfortable surface, high impact resistance and creates improved resistance to heat, sweat and moisture.
Excellent for cutting heavy fabrics, upholstery fabrics, felt, tarps and tent fabrics, as well as leather, carpeting and thick batting.
Specifications:
Overall length 26 cm - 10" inches (cutting length: 10 cm).
Weight 361 g
Material: C60 carbon steel with a hardness of approx. 59-60 HR
Powder coated handles
For heavy fabrics
ROBUSO Cardboard/Carpet Shears, serrated 1073/D/7.75"
€75.15*
ROBUSO Cardboard/Carpet Shears, serrated 1073/D/7.75"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied.It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.Our ROBUSO Floor Layer and Model Box Shears are the perfect shears for short cuts in strong material. Due to their long handles, your short, strong blades and their good leverage, the cutting force in the tip is very high.As with our ROBUSO Elastic scissors, our 1073/D/7.75" has an internal spring that sits between the blades in the screw area. This gives the scissors a particularly light and smooth action and allows for cutting without a lot of force.For our customers, this is the optimal floor layer scissors, strong in the tip and handy in use.The scissors are ideal for cutting model cardboard and for cutting corners, edges and borders in carpeting.Technical data:Overall length 20 cm - 7.75" inches (cutting length: 5 cm).Weight 208 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel plated scissor bladesPowder coated handlesOne cutting edge micro-serrated
Only 9 available
ROBUSO box and sheet metal shear 1075/C/12"
€139.80*
ROBUSO cardboard and sheet metal shear 1075/C/12"With much love and care, our shears are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied.
We, from Solingen, place great emphasis on quality and durability in the manufacture of our scissors.
Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.
Our ROBUSO 1075/C/12" cardboard and tin snips blades are made from extra high carbon tool steel C75. The short blades of the shears are interchangeable and the long handles are powder coated. The oversized long eye, into which four fingers fit, is ideal for strong hands and therefore allows for a BEAR strong cutting force.
Ideally suited for cutting strong cardboard, tarps and tents, as well as mats, tires and thin sheet metal, the large shears are ideal for use with a wide range of materials.
Technical Data:
Overall length 31 cm - 12" inches (cutting length: 6 cm).
Weight 563 g
Material: C75 carbon steel with a hardness of more than 60 HRC
Powder coated handles
Oversized long eye
Beastly cutting power
ROBUR Carpet Shears, stainless 2009/R/10"
€45.90*
ROBUR carpet shears, stainless 2009/R/10".ROBUR is quality "Made in Germany" and corresponds in part to SOLINGEN quality. The cutting tools are usually forged from mild steel, hardened and well machined. The proportion of manual work is about 40%.Our strong ROBUR Tailor's Shears 2010/TFL/8" with long, wide blades are ideally suited for cutting stronger fabrics to thin carpet.Technical data:Total length 26 cm - 10" inch (cutting length: 11 cm).Weight 198 gMaterial: mild steelStainless
Power Cutter R1 B70,for classic textiles
€1,099.00*
The Power Cutter R1 B70 for classic textiles.Our Power Cutter R1 B70 is ideally suited for cutting cotton textile,artificial/genuine leather and other classic textiles .Its light weight and high ridge of flexibility make it a true all-rounder in the cutting sector.Technical data: Weight: 1.25kg with battery Speed: 11.500 - 18.000 rpm Max.cutting height: up to 10mm Battery: 12V / 2,5AhScope of delivery: Powercutter R1 B71 2xBattery 2,5Ah Charger
MASTER-ROBUSO Tailor's Shears 1020/DMR/9
€87.90*
MASTER-ROBUSO Tailor's Shears 1020/DMR/9".With a lot of love and care, our shears are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.Our customers appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.The Master ROBUSO Tailor's Shears, is a classic tailor's shears model. In contrast to our 1020/C model, the blades are nickel-plated and embossed on the outside. On the outside of the blade is a gold etching with the words "MASTER ROBUSO".Our scissors are characterized by the firmness of the screw, the ease of movement and their uniformly high cutting force up to the tip. They are also appreciated for their long life and sensitive cutting of thin and thick fabrics. They also impress with their powder-coated handles with non-slip textured surface. This results in a skin-friendly and pleasant surface, high impact resistance and creates improved resistance to heat, sweat and moisture.Due to the favorable pivot point of our 1020/DMR/9" the scissors have a particularly goodleverage and enables easy cutting of materials without great effort.Technical data:Overall length 23.5 cm - 9" inch (cutting length: 10.5 cm).Weight 260 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel-plated scissors bladesPowder coated handles
MASTER-ROBUSO Tailor's Shears 1020/DMR/8"
€79.40*
MASTER-ROBUSO Tailor's Shears 1020/DMR/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.
The Master ROBUSO Tailor's Shears, is a classic tailor's shears model. In contrast to our 1020/C model, the blades are nickel-plated and embossed on the outside. On the outside of the blade is a gold etching with the words "MASTER ROBUSO".Our scissors are characterized by the firmness of the screw, the ease of movement and their uniformly high cutting force up to the tip. They are also appreciated for their long life and sensitive cutting of thin and thick fabrics. They also impress with their powder-coated handles with non-slip textured surface. This results in a skin-friendly and pleasant surface, high impact resistance and creates improved resistance to heat, sweat and moisture.
Due to the favorable pivot point of our 1020/DMR/8" the scissors have a particularly good
leverage and enables easy cutting of materials without great effort.
Technical Data:
Overall length 21 cm - 8" inches (cutting length: 9 cm).
Weight 185 g
Material: C60 carbon steel with a hardness of approx. 59-60 HRC
Nickel-plated scissors blades
Powder coated handles
MASTER-ROBUSO Tailor's Shears 1020/DMR/7"
€72.90*
MASTER-ROBUSO Tailor's Shears 1020/DMR/7"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.
We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.
Master ROBUSO Tailor's Shears, is a classic tailor's shears model. In contrast to our 1020/C model, the blades are nickel-plated and embossed on the outside. On the outside of the blade is a gold etching with the words "MASTER ROBUSO".
Our scissors are characterized by the firmness of the screw, the ease of movement and their uniformly high cutting force up to the tip. They are also appreciated for their long life and sensitive cutting of thin and thick fabrics. They also impress with their powder-coated handles with non-slip textured surface. This results in a skin-friendly and pleasant surface, high impact resistance and creates improved resistance to heat, sweat and moisture.
Due to the favorable pivot point of our 1020/DMR/, the scissors have a particularly good
leverage and enables easy cutting of materials without great effort.
Technical data:
Overall length 18.5 cm - 7" inches (cutting length: 8 cm).
Weight 130 g
Material: C60 carbon steel with a hardness of approx. 59-60 HRC
Nickel-plated scissor blades
Powder coated handles
MASTER-ROBUSO Tailor's Shears 1020/DMR/11"
€119.45*
MASTER-ROBUSO Tailor's Shears 1020/DMR/11"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.Our customers appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.The Master ROBUSO Tailor's Shears, is a classic tailor's shears model. In contrast to our 1020/C model, the blades are nickel-plated and embossed on the outside. On the outside of the blade is a gold etching with the words "MASTER ROBUSO".Our scissors are characterized by the firmness of the screw, the ease of movement and their uniformly high cutting force up to the tip. They are also appreciated for their long life and sensitive cutting of thin and thick fabrics. They also impress with their powder-coated handles with non-slip textured surface. This results in a skin-friendly and pleasant surface, high impact resistance and creates improved resistance to heat, sweat and moisture.Due to the favorable pivot point of our 1020/DMR/11" the scissors have a particularly goodleverage and enables easy cutting of materials without great effort.Technical Data:Overall length 29 cm - 11" inches (cutting length: 13.5 cm).Weight 420 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel-plated scissor bladesPowder coated handles
MASTER-ROBUSO Tailor's Shears 1020/DMR/10"
€104.10*
MASTER-ROBUSO Tailor's Shears 1020/DMR/10"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. Our customers appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.The Master ROBUSO Tailor's Shears, is a classic tailor's shears model. In contrast to our 1020/C model, the blades are nickel-plated and embossed on the outside. On the outside of the blade is a gold etching with the words "MASTER ROBUSO".Our scissors are characterized by the firmness of the screw, the ease of movement and their uniformly high cutting force up to the tip. They are also appreciated for their long life and sensitive cutting of thin and thick fabrics. They also impress with their powder-coated handles with non-slip textured surface. This results in a skin-friendly and pleasant surface, high impact resistance and creates improved resistance to heat, sweat and moisture.Due to the favorable pivot point of our 1020/DMR/10" the scissors have a particularly goodleverage and enables easy cutting of materials without great effort.Technical Data:Overall length 26 cm - 10" inch (cutting length: 12.5 cm).Weight 340 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel-plated scissors bladesPowder coated handles
Li-Ion battery for Azzurro Cutter
€65.00*
Our powerful Li-Ion battery with 2.400 mAh is specially designed for our Azzurro cutter.It offers a long runtime and high performance, so you can use your cutter anywhere and anytime.The battery is lightweight and compact.
With the Li-Ion battery for our Azzurro Cutter you are always well equipped.
Only 5 available
KAI Tailor's Shears, serrated 9.5"
€35.50*
KAI Tailor's Shears, serrated 9.5"This is a stainless steel series from the KAI company in Japan.The blades are made of robust stainless steel, which guarantees high resistance and long-lasting cutting performance.The handles are covered with solid rubber. This ensures better stability, better balance and comfortable handling when cutting. Thanks to the large eyes, these scissors can also be used with force.For easy and precise work, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibres of the material during the cut and enables an even and precise cut.Our customers appreciate the easy gait, the perfect haptics as well as the simple cutting also in industrial applications.Technical data:Total length 25.0 cm - 9.5" inch (cutting length: 10 cm).Weight 175 gMaterial: Stainless steelMicro-serrated
KAI Tailor's Shears 9.5",stainless steel
€83.00*
Stainless tailor scissors from KAI.This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materials.Technical data: Overall length: 25.0 cm - 9.5" cutting length: 9,5 cm Weight: 220 gr Stainless steel with approx. 58 HRC
KAI Tailor's Shears 9.5" left hand, stainless steel
€97.00*
Stainless left hand tailor scissors 9,5" from KAI from Japan.This is a high quality generation of tailor scissors made by KAI from Japan.The blades are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materials.Technical data: Overall length: 25.0 cm - 9.5" cutting length: 9,5 cm Weight: 220 gr Stainless steel with approx. 58 HRC Slim blades
Only 1 available
KAI Tailor's Shears 2200/R/8.5", stainless steel
€79.00*
KAI Tailor's Shears 2200/R/8.5", stainless steelStainless tailor scissors from KAI.This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materialsTechnical data:Overall length: 21.0 cm - 8.0"cutting length: 8,0 cmWeight: 200 gStainless steel with approx. 58 HRC