Stainless tailor scissors from KAI 2203/R/9,0"This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws that allow easy tension adjustment.This model is characterized by the easy gait and easy cutting even of thicker materials.Technical data:    Overall length: 25.0 cm - 9.0"    Cutting length: 9,5 cm    Weight: 200 g    Stainless steel with approx. 58 HRC    Slim blades

ROBUSO Leather/Cardboard/Carpet Scissors 1080/D/8.5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.  We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors. Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Leather and Carpet Shears are the ideal shears for cutting thicker materials. Due to their longer blade and good leverage, the cutting force at the tip is very high. It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture. The scissors are ideal for cutting leather, cardboard, rubber, carpet and for cutting multiple layers of fabric on top of each other. Technical data: Overall length 22.5 cm - 8.5" inches (cutting length: 6.5 cm). Weight 240 g Material: C60 carbon steel with hardness of approx. 59-60 HRC Nickel-plated scissors blades Powder coated handles One cutting edge micro-serrated

ROBUSO Leather/Cardboard Scissors 1078/C/9.5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors. Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability. Our ROBUSO Stencil Shears 1078/C/9.5" are highly regarded for their long handles and short, strong blades. Due to its good leverage and its double-sided micro serration, it is ideally suited for short powerful cuts in leather, felt and cardboard. It also convinces with its powder-coated red handles with non-slip textured surface. This creates a skin-friendly and comfortable surface, high impact resistance and generates improved resistance to heat, sweat and moisture. Technical data: Overall length 25 cm - 9.5" inches (cutting length: 4.5 cm). Weight 200 g Material: C60 carbon steel with hardness of approx. 59-60 HRC Powder coated handles Short blades, long handles

With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied. It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Leather Shears 1076/C/7" are highly regarded for their long handles and short, narrow, tapered blades. Due to its good leverage and micro serrations on both sides, it is ideally suited as leather shears, for short, strong cuts in upholstery and for trimming automotive trim parts. They also impress with their powder-coated red handles with non-slip textured surface. This produces a skin-friendly and pleasant surface, high impact resistance and generates improved resistance to heat, sweat and moisture. Technical data: - Overall length 18.5 cm - 7" inches (cutting length: 4.5 cm). - Weight 87 g - Material: C60 carbon steel with hardness of approx. 59-60 HRC - Powder coated handles - Micro serration on both sides

ROBUSO Leather scissors, curved up & serrated 1076/2/C/7"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied. It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Leather Curved Blade Scissors 1076/2/C/7" are highly regarded for their long handles and short, narrow, tapered blades. Due to its good leverage and its micro serration on both sides, it is ideally suited as leather shears in the upholstery and automotive industry, for trimming edges and protrusions. It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture. Technical data: Overall length 18.5 cm - 7" inches (cutting length: 4.5 cm). Weight 87 g Material: C60 carbon steel with hardness of approx. 59-60 HRC Powder coated handles Micro serration on both sides Curved blades

ROBUSO Edge shears, handles curved 1080/3/D/8,5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.We from Solingen, place great emphasis on quality and durability in the manufacture of our scissors.Because of this, they are handcrafted from C60 carbon steel (carbon steel - not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.Our ROBUSO curved edge shears are the ideal shears for trimming edges. Due to its longer blade and good leverage, the cutting force at the tip is very high.It also convinces with its powder-coated red handles with non-slip textured surface. This causes a skin-friendly and pleasant surface, a high impact resistance and creates improved resistance to heat, sweat and moisture.The scissors are ideal for trimming edges and borders in upholstery, as well as carpet installation.Technical data:Overall length 22.5 cm - 8.5" inches (cutting length: 6.5 cm).Weight 240 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel-plated scissors bladesPowder coated handlesCurved handles

ROBUSO Cardboard/Carpet Shears, serrated 1073/D/7.75"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied.It fixes the fibers of the material during the cut and enables an even and accurate cut. Our customers also appreciate the light and smooth action of our scissors, this ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability.Our ROBUSO Floor Layer and Model Box Shears are the perfect shears for short cuts in strong material. Due to their long handles, your short, strong blades and their good leverage, the cutting force in the tip is very high.As with our ROBUSO Elastic scissors, our 1073/D/7.75" has an internal spring that sits between the blades in the screw area. This gives the scissors a particularly light and smooth action and allows for cutting without a lot of force.For our customers, this is the optimal floor layer scissors, strong in the tip and handy in use.The scissors are ideal for cutting model cardboard and for cutting corners, edges and borders in carpeting.Technical data:Overall length 20 cm - 7.75" inches (cutting length: 5 cm).Weight 208 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCNickel plated scissor bladesPowder coated handlesOne cutting edge micro-serrated

ROBUSO cardboard and sheet metal shear 1075/C/12"With much love and care, our shears are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. On one of the two cutting edges of the scissors, for easy and accurate work, a fine micro-serration is applied. We, from Solingen, place great emphasis on quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability. Our ROBUSO 1075/C/12" cardboard and tin snips blades are made from extra high carbon tool steel C75. The short blades of the shears are interchangeable and the long handles are powder coated. The oversized long eye, into which four fingers fit, is ideal for strong hands and therefore allows for a BEAR strong cutting force. Ideally suited for cutting strong cardboard, tarps and tents, as well as mats, tires and thin sheet metal, the large shears are ideal for use with a wide range of materials. Technical Data: Overall length 31 cm - 12" inches (cutting length: 6 cm). Weight 563 g Material: C75 carbon steel with a hardness of more than 60 HRC Powder coated handles Oversized long eye Beastly cutting power

ROBUR Hobby scissors, stainless 2060/R/7,25".ROBUR is quality "Made in Germany" and corresponds in part to SOLINGEN quality. The cutting tools are usually forged from mild steel, hardened and well machined. The proportion of manual work is about 40%.Our ROBUR stainless hobby scissors with black plastic handles have a lock to open the blades, which can be easily operated with one hand. The scissors then open by themselves. To cut, it is closed, little force is required.These scissors are flexible in use and well suited for many jobs. In the textile industry for cutting thicker tapes or flaps, for the electrician, the plumber, for coarse materials and thin wire and as garden shears for cutting flowers.Technical data:- Overall length 19 cm - 7.25" inches (cutting length: 4.2 cm).- Weight 150 g- Material: mild steel- Stainless- Closure to open the blades

ROBUR carpet shears, stainless 2009/R/10".ROBUR is quality "Made in Germany" and corresponds in part to SOLINGEN quality. The cutting tools are usually forged from mild steel, hardened and well machined. The proportion of manual work is about 40%.Our strong ROBUR Tailor's Shears 2010/TFL/8" with long, wide blades are ideally suited for cutting stronger fabrics to thin carpet.Technical data:Total length 26 cm - 10" inch (cutting length: 11 cm).Weight 198 gMaterial: mild steelStainless

The Power Cutter R1 B70 for classic textiles.Our Power Cutter R1 B70 is ideally suited for cutting cotton textile,artificial/genuine leather and other classic textiles .Its light weight and high ridge of flexibility make it a true all-rounder in the cutting sector.Technical data:        Weight: 1.25kg with battery        Speed: 11.500 - 18.000 rpm        Max.cutting height: up to 10mm        Battery: 12V / 2,5AhScope of delivery:        Powercutter R1 B71        2xBattery 2,5Ah        Charger

Stainless tailor scissors from KAI.This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materials.Technical data:    Overall length: 25.0 cm - 9.5"       cutting length: 9,5 cm    Weight: 220 gr    Stainless steel with approx. 58 HRC

Stainless left hand tailor scissors 9,5" from KAI from Japan.This is a high quality generation of tailor scissors made by KAI from Japan.The blades are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materials.Technical data:        Overall length: 25.0 cm - 9.5"        cutting length: 9,5 cm        Weight: 220 gr        Stainless steel with approx. 58 HRC        Slim blades

KAI Tailor's Shears 2200/R/8.5", stainless steelStainless tailor scissors from KAI.This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materialsTechnical data:Overall length: 21.0 cm - 8.0"cutting length: 8,0 cmWeight: 200 gStainless steel with approx. 58 HRC

Stainless tailor scissors from KAI.This is a high-quality generation of tailor's shears from the KAI company in Japan.The blades are made of high-quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic. This ensures better stability, better balance and comfortable handling when cutting.All scissors are equipped with adjustable crown screws for easy tension adjustment.For easy and precise working, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibres of the material during the cut and enables an even and precise cut.Our customers appreciate the easy movement, the perfect haptics as well as the simple cutting of even thicker materials.Technical data:Overall length: 28.0 cm - 10.5"Cutting length: 11.5 cmWeight: 260 gStainless steel with approx. 58 HRC

KAI tailor scissor 2200/R/8"This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materials.Technical data:    Overall length: 21.0 cm - 8.0" Cutting length: 8.0 cm    Weight: 200 gr    Stainless steel with approx. 58 HRC

KAI tailor scissor 2200/R/11,5"This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materialsTechnical data:Overall length: 30.0 cm - 11.5"cutting length: 12,5 cmWeight: 315 gStainless steel with approx. 58 HRC

Stainless tailor scissors from KAI.This is a high quality generation of tailor scissors from the company KAI from Japan.The blade edges are made of high quality stainless steel with approx. 58 HRC, which guarantees high resistance and long-lasting cutting performance.The steel is drawn through to the end of the handle and coated with elastomer soft plastic for better stability, better balance and comfortable handling when cutting.All shears are equipped with adjustable crown screws for easy tension adjustment.Our customers appreciate the easy gait, the perfect feel as well as the easy cutting even of thicker materialsTechnical data:Overall length: 28.0 cm - 10.5cutting length: 11,5 cmWeight: 260 grStainless steel with approx. 58 HRC